Projector Connections
22
Caution
Do not start a playback at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
Connecting to Bluetooth
®
Audio Devices
You can connect your projector to Bluetooth audio devices (A2DP compliant)
such as speakers or headphones to output audio from streaming media player
or other video equipment connected to the projector.
a
• There is a delay in the audio output from any Bluetooth audio
devices.
• Bluetooth audio devices are not supported in some countries and
regions.
a
Turn on the projector and display an image.
b
Hold down the button on the remote control for about two
seconds.
The Bluetooth screen is displayed.
a
You can also select Bluetooth settings in the projector's Settings
menu.
s Settings > Sound > Bluetooth
c
Select On as the Bluetooth Audio setting.
d
Turn on "pairing mode" on the Bluetooth audio device you want to
connect to. See your Bluetooth audio device manual for details.
e
Select Search Bluetooth Device and press .
A list of available devices is displayed.
f
Select the Bluetooth audio device you want to connect to and press .
g
Press or to exit the menus.
The next time you turn on the projector, the last connected device is
automatically connected to the projector. To change the connected device,
repeat from steps 4.
gg Related Links
• "Bluetooth Specifications" p.23
To Next Page
Loading...
Need help?
General
