Adjusting the Image Color
45
d
Select Color > RGBCMY and press .
e
Select the color to adjust, and press .
f
Do the following as necessary for each setting:
• To adjust the overall hue of the color, bluish - greenish - reddish,
adjust the Hue setting.
• To adjust the overall vividness of the color, adjust the Saturation
setting.
• To adjust the overall color brightness of the color, adjust the
Brightness setting.
g
Press or to exit the menus.
Adjusting the Gamma
You can correct differences in projected image colors that occur between
different image sources by adjusting the Gamma setting.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Image menu and press .
d
Select Brightness > Gamma and press .
e
Select and adjust the correction value.
To Next Page
Loading...
Need help?
General
