Adjusting the Image Color
43
You can fine-tune various aspects of how colors are displayed in your
projected images.
gg Related Links
• "Adjusting the Color Temperature" p.43
• "Adjusting the RGB Offset and Gain" p.43
• "Adjusting the Hue, Saturation, and Brightness" p.44
• "Adjusting the Gamma" p.45
Adjusting the Color Temperature
You can set the overall color tone by adjusting the Color Temp. setting if the
image is too bluish or reddish.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
c
Select the Image menu and press .
d
Select Color > White Balance > Color Temp. and press .
e
Press the left or right arrow button to adjust the color tone of the
image.
Higher values tint the image blue and lower values tint the image red.
f
Press or to exit the menus.
Adjusting the RGB Offset and Gain
You can adjust the brightness of dark and bright areas by adjusting the Offset
and Gain settings for individual image colors.
a
Turn on the projector and display an image.
b
Press the button on the remote control.
To Next Page
Loading...
Need help?
General
