Solving Projector Power-On or Power-Off Problems
77
Check the solutions in these sections if the projector does not turn on when
you press the power button or it turns off unexpectedly.
gg Related Links
• "Solving Projector Power Problems" p.77
• "Solving Projector Shutdown Problems" p.77
Solving Projector Power Problems
If the projector does not turn on when you press the power button, try the
following steps until the problem is solved.
a
Check the following items.
• If you are using the remote control, check the batteries of the remote
control.
• Make sure the power cord is securely connected to the projector and
to a working electrical outlet.
b
Unlock the lock feature using the following method.
• To release Control Panel Lock, hold down the button on the
control panel for seven seconds.
• To release Child Lock, hold down the power button on the control
panel for three seconds.
c
Disconnect the cord and contact Epson for help.
gg Related Links
• "Projector Security Features" p.55
Solving Projector Shutdown Problems
If the projector's light source turns off unexpectedly, try the following steps
until the problem is solved.
a
Projectors may have entered sleep mode after a period of inactivity.
Perform any operation to wake the projector. To turn off sleep mode,
select Off as the Sleep Mode setting.
s Settings > Operation > Sleep Mode
b
When the status indicator is flashing, and the temp (temperature)
indicator is lit, the projector has overheated and turned off.
a
The cooling fans may run in standby status depending on the
projector settings. Also, when the projector wakes from standby
status, the fans may cause an unexpected noise. This is not a
malfunction.
gg Related Links
• "Projector Feature Settings - Settings Menu" p.61
To Next Page
Loading...
Need help?
General
