Preparing
21
e
Use the buttons to select the Bluetooth device you want to connect to, and
then press the
button to connect.
The next time you turn on the projector, it automatically connects to the last device it connected to.
To switch between the connected devices, repeat the procedure from step 3.
c
•
When Audio Out Device is set to AV System, audio cannot be output from Bluetooth audio devices.
To output audio from Bluetooth audio devices, set Audio Out Device to Projector.
s Settings -
HDMI Link - Audio Out Device p.68
•
There is a delay in the audio output from any Bluetooth audio devices.
Bluetooth specifications
Version
Bluetooth Ver. 3.0
Output
Class 2
Communication dis-
tance
Approx. 10 m
Supported profiles
A2DP
Content protection
SCMS-T
Frequency used
2.4 GHz band (2.402 to 2.480 GHz)
Supported codecs
SBC, Qualcomm
®
aptX
™
audio
Warning
•
Electromagnetic interference may cause medical equipment to malfunction. Before using the device, make
sure there is no medical equipment in the vicinity.
•
Electromagnetic interference may cause automatically controlled equipment to malfunction which could
cause an accident. Do not use the device near automatically controlled equipment such as automatic doors
or fire alarms.
To Next Page
Loading...
