Using the Projector on a Network (EH-TW5650 Only)
55
d
Select Basic, and then set the following as necessary.
•
Projector Name: Enter a name up to 16 alphanumeric characters long to identify the projector over the
network.
•
Remote Password: When operating the projector from a smartphone or a tablet, enter a password up to 8
alphanumeric characters long for accessing the projector.
•
Display LAN Info.: Set the display format for the projector's network information.
c
Use the displayed keyboard to enter the name, passwords and keyword. Press the
buttons on the remote control to highlight characters, and then press to
enter them.
e
Select Wireless LAN, and then press the button.
f
Select the Connection Mode setting.
•
Quick: Lets you quickly connect to one smartphone, tablet, or computer. When you select Quick, go to step 10.
•
Advanced: Lets you connect to multiple smartphones, tablets, or computers over a wireless network access
point. When you select Advanced, go to step 7.
When switching the connection mode, follow the on-screen instructions to save your settings. After
saving the settings, the Network menu is displayed.
g
Select Network Configuration - Wireless LAN - Search Access Point, to select the access
point you want to connect to.
h
If you need to assign the SSID manually, select SSID to enter the SSID.
To Next Page
Loading...
