Epson EH-TW5650 - Page 74

Configuration Menu
73
Function Menu/Settings Explanation
Screen Mirror-
ing Settings
Display
Name
-
(Only available when Screen Mirroring is set to
On.)
Enter a name to identify the projector when
searching for the projector using the Screen Mir-
roring feature.
Operation
Mode
Basic, Extended
Select Extended to enable Extended.
Adjust Im-
age Quality
1 (Fine), 2, 3, 4 (Fast)
(Only available when Screen Mirroring is set to
On.)
Adjusts the Screen Mirroring speed/quality.
Extended Interrupt
Connection
On, Off
(Only available when Extended is set to Exten-
ded.)
Sets whether or not to allow Interrupt Connec-
tion.
Channel 1 to 165
(Only available when Extended is set to Exten-
ded.)
Selects the frequency channel you want to use,
and then stabilizes the connection status.
Reset Yes, No
Resets all adjustment values on the Screen Mir-
roring Settings menu to their default settings.
Wireless LAN
Power
On, Off
Sets whether or not to use a wireless LAN (On or
Off).
Network infor-
mation - Wire-
less LAN
- Displays the following network settings.
•
Connection Mode
•
Wireless LAN system
•
Antenna Level
•
Projector Name
•
SSID
•
DHCP
•
IP Address
•
Subnet Mask
•
Gateway Address
•
MAC Address
•
Region Code
Display the QR
Code
-
(Only available when Wireless LAN Power is set
to On.)
Displays network information for the projector
with a QR code.
Network Con-
figuration
- Displays the screen to set the network. s p.74
Notes on operating the Network menu
Basic operations are made in the same way as when using the Configuration menu.
However, be sure to select the Setup complete menu to save your settings when done.