Epson EPL-7000 - LQ and FX Emulation Modes

Choosing a Font
After you choose the font source, you choose the font by number
based on the font source option selected above. Only fonts that
match the current orientation setting can be selected. If you change
the SYMSET or ORIENT settings, the available font numbers may
change. To save selected font as the default font, use the SAVE
MACRO option in the Level 1 SYSTEM CONFIG menu.
LQ and FX emulation modes
When you use either LQ or FX emulation mode, the FONT option
display shows:
Courier
Prestige
DL
This FONT option allows you to select a font by typeface. The
factory setting is Courier. After selecting the desired font, you can
also adjust the character spacing and size of the font with the
PITCH and CONDENSED settings found in this option’s submenu.
Note: Resident and optional fonts specifically designed for the
HP emulation mode cannot be used in the LQ or FX mode.
SelecType 3-37