Testing the Printer
The following messages appear as the printer performs a series of
internal tests and warms up:
CAUTIONS:
l Do not open the printer cover while the printer is
warming up or printing.
l After you turn off the printer, always wait at least
five seconds before turning it back on.
It takes approximately 70 seconds for the printer to complete its
power-on routine. When the READY message appears, you can
continue with the test print operation. If the display remains
blank, see Chapter 7 for troubleshooting information.
Selecting and running a test print
The printer has two SelecType levels. The status sheet feature is in
SelecType Level 1 and the test print feature is in Level 2.
2-10
Testing and Connecting Your Printer
To Next Page
Loading...
