Epson EPL-7000 - Level 2 Options

SelecType Options
0 to 4
Use this option to specify the macro number you want to use as
the power-on default for each operating mode. Each time you turn
the printer on, the macro you have set with this option is in effect.
Select macro 0 to use the factory default settings.
Level 2 options
When you hold down the SelecType button to enter Level 2, one of
the main menu options listed below appears on the display.
TEST PRINT
CH CONFIG
MEMORY SHARE
CH TIMEOUT
AUTO CONT.
BEEPER
P-CONFIG. SAVE
FACTORY RESET
VERSION
STANDBY
Each of these options is described below. An asterisk (*) indicates
the factory default setting.
3-24 SelecType