Epson EPL-7000 - Horizontal Motion

LQ and FX Emulation Modes
Vertical motion:
Form feeding
FF
ESC C
ESC C 0
ESC EM
ESC N
ESC 0
Line feeding
LF
ESC 0
ESC 1
ESC 2
ESC 3
ESC A
ESC J
ESC j
Form feed
Set page length in lines
Set page length in inches
Control cut sheet feeder
Set skip over perforation
Cancel skip over perforation
Line feed
Select l/8 inch line spacing
Select 7/72-inch line spacing (FX only)
Select l/6-inch line spacing
Select n/180-inch line spacing (LQ)
Select n/216-inch line spacing (FX)
Select n/60-inch line spacing (LQ)
Select n/72-inch line spacing (FX)
Perform n/180-inch line feed (LQ)
Perform n/216-inch line spacing (FX)
Perform n/180-inch reverse feed (LQ)
Perform n/216-inch reverse feed (FX)
Vertical tabbing
VT
Tab vertically
ESC B
Set vertical tabs
ESC b
Set vertical tabs in channels
ESC /
Select vertical tab channel
Horizontal motion:
Margins
ESC 1
Set left margin
ESC Q
Set right margin
Horizontal tabbing
HT
Tab horizontally
ESC D
Set horizontal tabs
Appendix C
C-15