Using the SUB CONFIG Option
OFF
* ON
Use this option to reprint after a paper jam. When it is set to ON
and a page jams in the printer, the page is reprinted after the jam
is cleared. If this option is set to OFF, a jammed page does not
reprint automatically, but complex pages may print faster.
OFF
*ON
When AUTO CR (automatic carriage return) is ON, the printer
performs a carriage-return line-feed (CR-LF) operation whenever
the print position exceeds the right margin. If it is OFF, characters
beyond the right margin are not printed, and a linewrap is not
performed until a CR is received. Most software programs take
care of this function.
This option determines whether the printer prints a slashed zero
(0) or an open zero (0). This feature is useful for clearly
distinguishing between an uppercase letter O and a zero when
printing documents such as programming lists.
3-46
SelecType
To Next Page
Loading...
