SelecType Options
This option displays the amount of memory available. You can use
this information to see whether a newly-installed memory option
is working correctly or to see how much memory you have
available for fonts or complex graphics.
0
to
4
Use this option to load one of the macros you’ve created using the
macro save option. The factory setting is 0. When you press
the following appears on the display:
Press or to choose the number of the macro you want
to use. Then press to load the selected macro. Whenever you
select macro 0, all Level 1 settings return to their factory settings.
Press to exit this submenu without loading a macro.
1 to 4
This option lets you save your current Level 1 settings as a macro
and recall them anytime. You can save up to four macros for each
channel using the numbers 1 through 4. When you press the
display shows:
3-22
SelecType
To Next Page
Loading...
