SelecType Options
After you select the type of serial interface, you enter one of the
submenus for the SERIAL option shown below.
WORD LENGTH
BAUDRATE
PARITY
STOP BIT
DTR
XON/XOFF
ENQ/ACK
DSR
CTS
A brief description of each serial interface option follows.
Note: The interface options are the same for both the RS-232C
and M-422 serial interface modes.
7
8
You can select a word length for serial communications from two
options: B-bit word length or 7-bit word length. See your computer
manual and software documentation for the proper setting. The
factory setting is B-bit.
3-28 SelecType
To Next Page
Loading...
