112
5. Gently pull out any jammed originals from the output tray.
6. Close the scanner cover.
7. Carefully follow all loading instructions when you reload originals.
If originals jam in the scanner frequently, try the following:
• Press the slow mode button to slow down the scanning speed.
• Clean inside the scanner and replace the roller assembly kit, if necessary.
• Close the output tray and let the originals fall freely onto the surface below the scanner.
Parent topic: Solving Scanning Problems
Related tasks
Loading Photos in the Input Tray
Loading Documents in the Input Tray
Loading Plastic Cards in the Input Tray
Loading Special Documents
To Next Page
Loading...
