Note:
❑
Wipe the glass of the Transparency Unit, the scanner’s document
table, and the narrow window near the mounting bracket with a
soft, dry cloth before scanning transparencies.
❑
Your scanner software automatically controls the operation of the
Transparency Unit.
Loading 35 mm slides
1. Load slides in the 35 mm slide holder face down, as shown
below. Repeat this step for all the slides you scan.
2. Place the slide holder on the document table. Align the slide
holder with the notch on the transparency guide, as shown
below.
f-003
f-004
L
Ginger Rev.C
A5 size Chapter 3
97/07/23 Pass 3, DR
3-8
Options
To Next Page
Loading...
