1. Slide the edge guides all the way to the outside.
2. Insert the paper stack into the Auto Document Feeder until
it meets resistance. Make sure that the side you want to
scan faces up. Then adjust the edge guides to match the size
of your paper.
If your document is in portrait orientation (meaning the
top and bottom edges are shorter than the side edges),
insert the document with the bottom edge closest to the
document feed path.
04-48
04-492
L
Ginger Rev.C
A5 size Chapter 3
97/07/23 Pass 3, DR
3-22
Options
To Next Page
Loading...
