EasyManuals Logo

Epson GT-30000 Setup Guide

Epson GT-30000
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
2
Safety Instructions
L
R4C3820
Rev. C
A5 size INTRO.FM
4/9/01 Pass 0
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
Unplug the scanner and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged.
If liquid has entered the scanner.
If the scanner has been dropped or the case damaged.
If the scanner does not operate normally or exhibits a
distinct change in performance. (Do not adjust controls
that are not covered by the operating instructions.)
If you plan to use the scanner in Germany, observe the
following:
To provide adequate short-circuit protection and over-
current protection for this scanner, the building installation
must be protected by a 10 or 16 amp circuit breaker.
Note for German-speaking users:
Bei Anschluss des Scanner an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer 10 A-
oder 16 A-Sicherung abgesichert ist.
Warnings, Cautions, and Notes
w
Warnings
must be followed carefully to avoid bodily injury.
c
Cautions
must be observed to avoid damage to your equipment.
Notes contain important information and useful tips on the operation
of your scanner.

Table of Contents

Other manuals for Epson GT-30000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson GT-30000 and is the answer not in the manual?

Epson GT-30000 Specifications

Power IconPower
voltageAC 100V-120V, 220V-240V
frequency50-60Hz
power consumption operating without ADF65W
power consumption operating with ADF90W
power consumption standby without optional unit12W
Operating Environment IconOperating Environment
temperature operating41ºF to 95ºF (5ºC to 35ºC)
humidity operating10% to 80% (no condensation)
humidity storage10% to 85% (no condensation)
Scanning Specifications IconScanning Specifications
optical resolution600 x 1200 dpi with Micro Step Drive™ technology
maximum resolution9600 x 9600 dpi with interpolation
effective pixels7020 x 10200 pixels (600 dpi)
color depth internal36 bits per pixel
color depth external24 bits per pixel (selectable)
grayscale depth internal/external12 bits per pixel
grayscale depth external8 bits per pixel
scanning speed at 1600 dpi, draft mode, color0.79 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, grayscale0.39 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, art0.39 msec/line (approx.)
Weight and Dimensions IconWeight and Dimensions
maximum read area11.7" x 17.0" (297mm x 432mm)
width25.9" (658mm)
depth19.2" (488mm)
height10.0" (254mm)
weight66 lb (37.5 kg approx.)

Related product manuals