3-12
Installing the Software
R4C3820
Rev. C
A5 size INSTALL.FM
4/9/01 Pass 0
L
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
For Windows 98 users
1. Connect your scanner to your PC.
2. Turn on the scanner, then your PC.
Note:
It is important to follow this power-on sequence if you are using a
SCSI interface. Otherwise the Plug and Play feature will not work.
3. When a dialog box similar to the one shown below appears,
insert the scanner software CD in the CD-ROM drive, then click
Next
.
To Next Page
Loading...
