5-4
Using the Start Button
R4C3820
Rev. C
A5 size SBUTTON.FM
4/9/01 Pass 0
L
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
3. On the Events menu, make sure the Start Button is selected in
the Select an event list, and select the application you want to
assign from the Start this program list.
4. Click OK to close the dialog box.
For Windows 98 and 2000 users
1. Double-click the Scanners and Cameras icon in Control
Panel.
2. Select your scanner from the installed scanners and cameras list
in the Scanners and Cameras Properties dialog box.
3. Click Properties, and then select the Events tab. The following
dialog box appears.
4. The Start Button is selected in the Scanner events list.
To Next Page
Loading...
