3-14
Installing the Software
R4C3820
Rev. C
A5 size INSTALL.FM
4/9/01 Pass 0
L
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
6. Follow the instructions on the screen. Depending on your
system, you may be asked to insert the Windows 98 CD-ROM.
Replace the scanner software CD with the Windows 98 CD-
ROM. Make sure that the correct CD-ROM drive letter and
the Win98 folder are specified in the Copy files from: box as
shown below.
After installing the appropriate files, replace the Windows 98
CD-ROM with the scanner software CD.
7. The EPSON Screen Calibration utility automatically starts.
Follow the instructions on the screen. For details, see
“Calibrating Your Screen” on page 3-39.
Note:
If the EPSON Screen Calibration utility does not start
automatically, see your Online Reference Guide to calibrate your
screen after installing the scanner software.
To Next Page
Loading...
