3
Installing the Software
3-21
R4C3820
Rev. C
A5 size INSTALL.FM
4/9/01 Pass 0
R
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
11. Click Test to check the connection. If everything is properly
installed and connected, Status: Device Ready appears under
Scanner Information in the dialog box
.
If the “Device Ready” message does not appear, see
“Maintenance and Troubleshooting” in your Online Reference
Guide.
12. Click OK
to close the EPSON TWAIN HS dialog box.
The EPSON Screen Calibration utility automatically starts. Go
to “Calibrating Your Screen” on page 3-39.
This completes the EPSON TWAIN HS installation. You can now
continue and install the other utility and applications from the
scanner software CD. To install EPSON Scan Server and EPSON
TWAIN HS Network, see “Software for Scanning over a
Network” on page 3-22. To install the ISIS driver, see “Installing
Another Application Software” on page 3-38.
To Next Page
Loading...
