Epson GT-30000 - Page 75

3
Installing the Software
3-35
R4C3820
Rev. C
A5 size INSTALL.FM
4/9/01 Pass 0
R
Proof Sign-off:
KOW S.Koide C.Fujiwara
J.Miyakoshi
NOC Lee
7. In the Network Scanner Address box, enter the IP address or
Host name of the scanner server PC.
Note:
❏ If you enter the IP address or Host name of the scanner server
PC which connects a scanner other than GT-30000, the Scanner
Status box displays a message indicating that this scanner is
not supported. If this happens, you need to select the GT-30000
scanner as the default scanner on the scanner server PC.
For Windows 98, 2000, and Millennium Edition users, select
EPSON GT-30000 in the Scanners and Cameras Properties
list. See “Selecting Scanners” on page 3-41.
For Windows 95 and NT 4.0 users, select EPSON GT-30000
in the EPSON Scan Server setup dialog box.
❏ Host name can be used on networks that employ the DNS,
WINS or LMHOSTS naming service.
❏ To delete the IP address or Host name, select it and then click
Delete.
8. Specify the Timeout Setting. Normally you do not need to
change this value. Valid values range from 30 to 300 seconds.
For screen calibration, refer to “Calibrating Your Screen” on
page 3-39.