Epson GT-S50 User Manual

Slide the carrier sheet into the feeder until it meets resistance. Then slide the edge guides over to fit the edges of the carrier sheet.
To start scanning, see Starting a Scan Using Epson Scan for instructions.
Note:
The carrier sheet should be replaced after every 500 scans* or if scratched or stained. (*Replacement timeline may vary
depending on usage.)
Top
Loading Cards
Note:
Results are not guaranteed when scanning plastic cards with shiny surfaces, such as ID cards.
Open and extend the input tray. Then, slide out and extend the output tray.

Epson GT-S50 Specifications

General

Scanner Type	Sheetfed
Optical Resolution	600 dpi
ADF Capacity	75 sheets
Connectivity	USB 2.0
Duplex Scanning	Yes
Color Depth	48-bit input / 24-bit output
Scan Speed	25 ppm (black and white), 8 ppm (color)