Home > Maintenance
Replacing the Roller Assembly Kit
It is recommended that you replace the parts on the roller assembly kit after every 100,000 scans.
Note:
You can check the number of scans by starting EPSON Scan Settings and clicking Maintenance.
Removal part Part number
Roller Assembly Kit B12B813421
To replace the roller assembly kit, follow the steps below:
Turn off the scanner.
Remove all paper from the input tray.
Unplug the AC adapter from the scanner.
Pull the lever and open the scanner cover.
Press the hook on the separation pad, then remove the installed separation pad.
To Next Page
Loading...
