If the glass surface inside the scanner gets dirty, clean it with a soft, dry, lint-free cloth. If the glass surface is stained with grease
or some other hard-to-remove material, use a small amount of glass cleaner with a soft cloth to remove it. Wipe off all remaining
liquid.
Caution:
Do not spray glass cleaner directly on the scanner glass.
Make sure that no dust builds up on the glass surface inside the scanner. Dust can cause abnormalities or lines in your scanned
images.
Top
Cleaning the Paper Path Rollers
Open the scanner cover. See Opening the Scanner Cover for instructions.
Wipe the rollers with a lint-free cloth dampened with water and thoroughly wrung out.