Epson L800 - Page 27

L800/L801 Revision A
Disassembly/Reassembly Housing Upper Assy 26
Confidential
2. Slide the Front Housing in the direction of the arrow and remove the Front
Housing from the Upper Housing.
Figure 1-21. Removing the Front Housing
When installing the Upper Housing, be careful of the following:
 Do not pinch the cables.
 Tighten the screws in the order given in
Fig.1-20 (p.25).
 Match the ribs of the Upper Housing shown in
Fig.1-20 (p.25)
with the grooves of the Housing Lower.
 As shown in
Fig.1-22, match the A part of the Front Housing
with the screw box of the Housing Lower.
Figure 1-22. Installing Upper Housing
[Rear Side]
Ribs
Front Housing
Grooves
Front Housing
Screw box of
Housing Lower
A part of Front
Housing