Epson L800 - Adjust Print Quality; Clean the Print Head

L800/L801 Revision A
Disassembly/Reassembly APG Sensor Assy 57
Confidential
1.5.16 APG Sensor Assy
¸ Removal procedure
1. Disengage the two hooks and remove the APG Sensor Assy.
Figure 1-107. Removing the APG Sensor
1.5.17 Front Paper Guide Assy
¸ Removal procedure
1. Remove the screw and remove the Parallelism Bushing L.
• Screw : C.B.S.(P2) M3x8 (tightening torque: 6-8 kgf.cm)
Figure 1-108. Removing the Parallelism Bushing L
APG Sensor Assy
:Hook
C A U T I O N
Do not touch the surface of the rubber roller of the EJ Roller Assy
and the coated part of the PF Roller Assy as it can adversely affect
the print quality.
Parallelism Bushing L
Front Paper Guide Assy
[Rear Side]
Positioning Hole and Guide Pin