L800/L801 Revision A
Disassembly/Reassembly Bottom Cover / Left Cover / Right Cover / Cover Joint 63
Confidential
1.6.5 Bottom Cover / Left Cover / Right Cover / Cover Joint
Be careful about how to place the Ink Supply Tank Assy in order to prevent printing failure from occurring. (See
“How to place the Ink Tank Assy when disassembling/reassembling” (p.10).)
The figures above indicate the hooks and ribs that secure the parts.
Remove the exterior parts of the Ink Supply Tank Assy in the following order.
1. Remove the screws (x8) of the Bottom Cover, and remove the Bottom Cover.
2. Remove the Left Cover and Right Cover.
3. Remove the Cover Joint.
Tighten the screws in the order indicated in the figure above.
Ink Supply Tank Assy
Hook
Rib
Left Cover
Bottom Cover
C.B.P. 3X6 (3-5kgf.cm)
1
2 3 4 5 6 7
8
Right Cover
Cover Joint
To Next Page
Loading...
