Epson L800 - Page 39

L800/L801 Revision A
Disassembly/Reassembly Printhead 38
Confidential
3. While disengaging the hook of the Head FFC Cover Inner with a flathead
screwdriver, slide the Head FFC Cover Inner upward and remove it.
Figure 1-49. Removing the Head FFC Cover Inner
4. Using the special tool (see
p.15) disengage the hook A of the Holder Contact
on the left back of the Carriage Unit.
Figure 1-50. Removing the Holder Contact (1)
5. Using the special tool (see p.15) disengage the hook B of the Holder Contact
on the right back of the Carriage Unit.
6. Slide the Holder Contact upward and remove the Holder Contact.
Figure 1-51. Removing the Holder Contact (2)
Removal Direction
Screwdriver
Hook
Head FFC Cover Inner
Hook A
[Back Side]
Holder Contact
Special Tool
C A U T I O N
Take extra care not to spill ink and contaminate the surroundings.
Be extremely careful not to touch the nozzle surface, the ink supply
needles and the Head Cover, otherwise the nozzles may get
clogged.
Figure 1-52. Handling of the Printhead
Hook B
[Back Side]
Holder Contact
Removal Direction
Special Tool
Printhead
Nozzle surface
Head Cover