L800/L801 Revision A
Maintenance Overview 95
Confidential
Figure 3-20. Lubrication of the LD Roller Shaft (3)
<Lubrication Points>
Contact point between the LD Roller
and Hopper, ASF Gear
<Type>
G-71
<Application Amount>
ø 1 x 1/4-circle x 4 points
<Application Timing>
Apply before assembling the LD Roller
Holder
<Remarks>
Apply with Injector
¸ Rotate the LD Roller Shaft so that
the Curved/Flat surface face up, then
apply grease to the specified parts.
LD Roller Shaft (Curved surface)
(Ribs beside the LD Roller)
Application Point
To Next Page
Loading...
