Epson LQ-670 - Platen Removal

LQ-670 Service Manual
Rev. A
3-22
3.2.14 Platen Removal
1. Remove the Printer Mechanism (See Section 3.2.2)
2. Remove the Paper Exit ASSY. (See Section 3.2.8)
3. Remove the Carriage ASSY. (See Section 3.2.12)
4. Remove the Paper Guide (See Section 3.2.13)
5. Rotate the platen shaft holder at the both ends of the platen, to match a tab to a cutout of
the frame assembly.
6. Slide the platen to left once, and remove it to upward.
PLATEN
Retaining Ring
(E-shaped)
Shaft Holder
Shaft Holder
Retaining Ring
(E-shaped)
Washer
(bent)
Washer
(flat)
Figure 3-22. PLATEN Removal