Epson LQ-670 - Default-Setting Mode

Chapter 3 Disassembly and Assembly
Rev. A
3-2
3
3.2.15 MOTOR, PF Removal
1. Remove the Printer Mechanism (See Section 3.2.2)
2. Take out the cable of [MOTOR, PF] from the cable holder at the bottom of Printer
Mechanism.
3. Remove tow screws (CBS/M3x6) fixing [MOTOR, PF] to [FRAME ASSY., LEFT] and
remove it.
CBS (M3x6)
MOTOR, PF
(located inside [FRAME ASSY., LEFT])
Figure 3-23. MOTOR, PF Removal