Epson LQ-670 - DETECTOR, HP Removal; Detector; DETECTOR, REL Removal

LQ-670 Service Manual
Rev. A
3-24
3.2.16 DETECTOR, HP Removal
1. Remove the Printer Mechanism (See Section 3.2.2)
2. Unhook [DETECTOR, HP] form [FRAME, CR] and remove it.
3. Disconnect the cable from [DETECTOR, HP].
3.2.17 DETECTOR, PG Removal
1. Remove the Printer Mechanism (See Section 3.2.2)
2. Unhook [DETECTOR, PG] from [FRAME ASSY., RIGHT] and remove it.
3. Disconnect the cable from [DETECTOR, PG].
3.2.18 DETECTOR, REL Removal
1. Remove the Printer Mechanism (See Section 3.2.2)
2. Unhook [DETECTOR, REL] from [FRAME ASSY., RIGHT] and remove it.
3. Disconnect the cable from [DETECTOR, REL].
DETECTOR, HP
DETECTOR, PG
DETECTOR, REL
Figure 3-24. DETECTOR HP / PG / REL Removal