Epson LQ-670 - Using Single Sheets

The following table provides guidelines for selecting the
appropriate lever position for the type of paper you are using.
Paper type Paper thickness
lever position
Thin paper 0 or 1
Ordinary paper (sin
g
le sheets or
continuous paper)
0
Multi-part forms (c arbonless)
2 p a rts (ori
g
inal plus + 1 copy)
3 p a rts (ori
g
inal plus + 2 copies)
4 p a rts (ori
g
inal plus + 3 copies)
5 p a rts (ori
g
inal plus + 4 copies)
1
2
3
5
Labels and postcards 2
En v e lo p e s* 2 t o 6
* For thin envelop es, suc h a s a irmail envelopes, select position 2 or 3;
for re
g
ular envelopes, select position 4; for thic k envelopes, selec t
position 4, 5, or 6.
c
Caution:
Always set the paper thickness lever back to the “0” position
before you print on ordinary paper again.
Using Single Sheets
Your printer can print on single sheets of paper from 92 to 297 mm
(3.6 to 11.7 inches) wide. See Appendix A for detailed single-sheet
paper specifications.
You can load one sheet of paper at a time into the paper guide at
the front of the printer, or you can load a stack of paper in the
optional cut-sheet feeder. (See Chapter 5 for more information on
the optional cut-sheet feeder.)
Note:
If you load long paper (for example, legal size paper), leave enough space
at the back of the printer so that the paper is not obstructed.
L
Adonis Rev.C
A5 size Chapter 3
96/12/ 19 pass 5
3-6
Paper Handling