4. Move the paper release lever back to the single-sheet position.
Now you can load single sheets from the paper guide. For
instructions, see “Using Single Sheets” on page 3-6.
Switching to continuous paper
To switch from single sheets to continuous paper, follow the steps
below.
1. If necessary, press the
Lo a d / Eje c t
button to eject the last
printed single sheet.
2. Make sure continuous paper is loaded in the printer as
described under “Loading continuous paper with the tractor”
on page 3-11.
A32
L
Adonis Rev.C
A5 size Chapter 3
96/12/ 19 pass 5
3-26
Paper Handling
To Next Page
Loading...
