Epson LQ-670 - Loa Ding a Roll of Pa Per

Loading a roll of paper
To load a roll of paper on the roll paper holder, follow these steps:
1. Cut the leading edge of the roll paper straight across. Slide the
roll paper holder shaft through the center of the paper roll.
2. Set the shaft and paper roll onto the roll paper holder. Load
the roll so the paper feeds from the top of the roll and the edge
of the roll paper passes under the tension lever. Then press the
Operate
button to turn on the printer.
4-7
A44
5
R
Adonis Rev.C
A5 size Chapter 5
96/12/ 19 pass 5
Using Printer Options
5-17