Epson LQ-670 - Default-Setting Mode

Using the Default-Setting Mode
The default settings control many printer functions. While you can
often set these functions through your software or printer driver,
you may sometimes need to change a default setting from the
printer’s control panel using the default-setting mode.
For a detailed description of the settings you can change in the
default-settings mode, see the next section. For instructions on
changing the settings, see “Changing the default settings” later
in this chapter.
Default-settin
g
mode options
This section describes the options and settings available in the
default-setting mode. Use the table below for quick reference
when changing default settings. The options are explained in
more detail after the table.
Option Settin
g
s
Pa
g
e len
g
th for tractor 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, 70/6, 12,
14, 17 inc hes
Skip-over-p erforation On, Off
Auto tear off On, Off
Auto line feed On, Off
Print direction Auto, Bi-d, Uni-d
I/ F (interfa c e) m od e Auto, Para llel I/ F, Option I/ F
Auto I/F (interface) wait time 10 seconds, 30 seconds
Software ESC/P 2, IBM 2390 Plus
4
R
Adonis Rev.C
A5 size Chapter 4
96/12/ 19 pass 5
Using the Control Panel
4-9