Epson LQ-670 - Cut-Sheet Feeders

This chapter describes how to use optional equipment with
your printer, including cut-sheet feeders, a roll paper holder,
and interface cards.
Cut-Sheet Feeders
Two cut-sheet feeders are available for use with your printer:
Printe r m ode l Hi
g
h capacity (bin 1) Second bin (bin 2)
LQ-670 C80678✽ C80679✽
The asterisk (✽) is a substitute for the last di
g
it, whic h varies by c ountry.
Contact your local EPSON dealer for the part number in your country.
You can install the high-capacity cut-sheet feeder by itself, or
you can assemble and install a double-bin cut-sheet feeder by
combining the high-capacity and second-bin feeders. When the
double-bin cut-sheet feeder is installed, the high-capacity cut-sheet
feeder is used as bin 1 and the second-bin feeder is used as bin 2.
Note:
The second-bin feeder can be used only in combination with the
high-capacity feeder.
Before you install a cut-sheet feeder, read the manual that comes
with it. The cut-sheet feeder manual provides instructions on how
to combine the two cut-sheet feeders to create the double-bin
cut-sheet feeder.
L
Adonis Rev.C
A5 size Chapter 5
96/12/ 19 pass 5
5-2
Using Printer Options