Epson LQ-670 - Page 81

Bidirec tional adjustment = Pa use
Turns on the bidirectional adjustment mode, which allows you
to correct printing alignment problems. See “Using Bidirectional
Adjustment” in Chapter 7 for details.
Hex dump = Lo a d / Eje c t + LF/ FF
Prints the data sent to the printer in hexadecimal code, which
helps experienced users determine the source of some printing
problems. See “Using Hex Dump Mode” in Chapter 7 for details.
Default settin
g
= Fo n t
Turns on the default-setting mode, which allows you to change
the printer’s default settings. For more information, see “Using
the Default-Setting Mode” later in this chapter.
Quiet mode = Fo n t + C o n d e n se d
Turns on the printer’s quiet mode, which lowers the noise level
during printing. For more information, see “Using Quiet Mode”
later in this chapter.
L
Adonis Rev.C
A5 size Chapter 4
96/12/ 19 pass 5
4-8
Using the Control Panel