2. Hold down the
Pa use
button for about three seconds. The
Pa u se
light begins flashing and the printer enters the
micro-adjust mode.
3. If necessary, open the printer cover to check the printing
position, and press the
LF/ FF
[
D
] button to feed paper forward
or the
Load/Eject
[
U
] button to feed paper backward.
4. When your paper is positioned correctly, press the
Pa use
button to turn off micro-adjust mode and resume printing.
A34
L
Adonis Rev.C
A5 size Chapter 3
96/12/ 19 pass 5
3-30
Paper Handling
To Next Page
Loading...
