Epson LX-1170 User Manual

3-16
Using the Printer Software
Using the EPSON Remote! Utility
(LX-300+ only)
The EPSON Remote! utility allows you to easily change the
printer’s default settings from your computer’s DOS prompt.
Installing EPSON Remote!
Follow these steps to install the EPSON Remote! utility:
1. Insert the printer software CD-ROM into the CD-ROM drive.
2. At the DOS prompt, type D:\SETUP. (If you inserted the disk
into a drive other than drive “D,” substitute “D” with the
appropriate letter.) Then press Enter.
3. Select your printer’s name in the Printer Model window and
then press Enter. C:\EPUTIL appears as the default directory.
4. Press Enter again. The EPSON Remote! utility is copied to the
C:\EPUTIL directory.
Accessing EPSON Remote!
To access the EPSON Remote! utility, type C:\PRNSET at the DOS
prompt and press Enter. Then follow the on-screen instructions
to use this utility. You can also access the EPSON Remote! utility
by typing C:\PANEL at the DOS prompt and then pressing Enter.
The PRNSET and PANEL access methods differ slightly. The
PANEL method opens a condensed version of EPSON Remote!
that only provides the most often used settings.

Epson LX-1170 Specifications

Print Speed

high speed draft 15 CPI	337 cps
high speed draft 12 CPI	337 cps
high speed draft 10 CPI	300 cps
high speed draft 20 CPI condensed	300 cps
high speed draft 17 CPI condensed	321 cps

Power

rated voltage	AC 120V or AC 220~240V
rated frequency	50~60Hz
power consumption	23W

Environmental Conditions

temperature	5~35˚C
humidity	10~80% RH
acoustic noise	49dB (A)

Reliability

MVBF (Mean Print Volume Between Failure)	12 million lines
MTBF (Mean Time Between Failure)	6000 POH
print head life	400 million strokes/ wire

Weight and Dimensions

width	546 mm
depth	275 mm
height	163 mm
weight	6.3 kg