Epson LX-1170 User Manual

1
Setting Up the Printer
1-21
3. Click Install to start the printer software installation.
4. Select your printer from the list, then follow the instructions
on the screen.
When you install the printer driver on Windows Me, 98, 95, 2000
or NT 4.0, the EPSON Status Monitor 3 utility will also be
installed.
For information on launching and using the software, see Chapter
3, “Using the Printer Software.”
Installing the software in Windows 3.1 or NT 3.5x
Follow these steps to install the printer software in Windows 3.1
or NT 3.5x.
Note:
❏ Printer software for Windows 3.1 and NT 3.5x is only provided for
LX-300+. If you need to use LX-1170 on those operating systems,
contact your dealer.
❏ Installing the printer software on Windows NT 3.5x may require
administrator privileges. If you have problems, ask your
administrator for more information.
1. Make sure Windows is running and the Program Manager
window is open.
2. Insert the printer software CD-ROM shipped with your
printer into the CD-ROM drive. (If you are using floppy disks,
insert Disk1 of your printer software into the floppy disk
drive.)

Epson LX-1170 Specifications

Print Speed

high speed draft 15 CPI	337 cps
high speed draft 12 CPI	337 cps
high speed draft 10 CPI	300 cps
high speed draft 20 CPI condensed	300 cps
high speed draft 17 CPI condensed	321 cps

Power

rated voltage	AC 120V or AC 220~240V
rated frequency	50~60Hz
power consumption	23W

Environmental Conditions

temperature	5~35˚C
humidity	10~80% RH
acoustic noise	49dB (A)

Reliability

MVBF (Mean Print Volume Between Failure)	12 million lines
MTBF (Mean Time Between Failure)	6000 POH
print head life	400 million strokes/ wire

Weight and Dimensions

width	546 mm
depth	275 mm
height	163 mm
weight	6.3 kg