Epson LX-1170 User Manual

Using the Printer Software
3-9
3
Once you have checked your printer driver settings and changed
them if necessary, you are ready to print.
Using the Printer Driver with Windows NT 3.5x
Printer software for Windows NT 3.5x is only provided for
LX-300+.
You can access the printer driver from your Windows
applications or from the Control Panel.
When you access the printer driver from a Windows application,
any settings you make apply only to the application you are using.
When you access the printer driver from the Control Panel, the
printer driver settings you make can apply to all your
applications.
To check and change printer driver settings, see “Changing the
printer driver settings” on page 3-10.
Note:
While many Windows applications override the settings made with the
printer driver, some do not, so you must verify that the printer driver
settings match your requirements.
Accessing the printer driver from Windows
applications
Follow these steps to access the printer driver from a Windows
application:
Note:
The steps in this procedure provide general guidelines on accessing the
printer driver. How you access the printer driver may differ depending
on your application. See your application manual for details.

Epson LX-1170 Specifications

Print Speed

high speed draft 15 CPI	337 cps
high speed draft 12 CPI	337 cps
high speed draft 10 CPI	300 cps
high speed draft 20 CPI condensed	300 cps
high speed draft 17 CPI condensed	321 cps

Power

rated voltage	AC 120V or AC 220~240V
rated frequency	50~60Hz
power consumption	23W

Environmental Conditions

temperature	5~35˚C
humidity	10~80% RH
acoustic noise	49dB (A)

Reliability

MVBF (Mean Print Volume Between Failure)	12 million lines
MTBF (Mean Time Between Failure)	6000 POH
print head life	400 million strokes/ wire

Weight and Dimensions

width	546 mm
depth	275 mm
height	163 mm
weight	6.3 kg