Using the Printer
2-11
2
❏ Are you printing on labels, multipart forms, or other
documents that require a precise print position? Use the
tractor as a pull tractor. See “Printing with the pull tractor”
on page 2-16 for instructions.
For specifications on the type of continuous paper you can use,
see “Paper” on page A-8.
Printing with the push tractor
When using the push tractor, it is a good idea to set the Auto tear
off feature in the Default Setting mode to On. See “About Your
Printer’s Default Settings” on page 2-3.
Follow these steps to load continuous paper using the push
tractor:
1. Make sure the printer is turned off. Remove the printer cover
and the paper guide and place the paper-release lever in the
continuous paper position.
To Next Page
Loading...
