Epson LX-1170 User Manual

A-4
Printer Specifications
Mechanical
Printing method: 9-pin impact dot matrix
Printing speed: High speed draft 300 cps at 10 cpi
337 cps at 12 cpi
Draft 225 cps at 10 cpi
270 cps at 12 cpi
225 cps at 15 cpi
Draft condensed 191 cps at 17 cpi
225 cps at 20 cpi
NLQ 56 cps at 10 cpi
67 cps at 12 cpi
56 cps at 15 cpi
Printing direction: Bidirectional logic seeking for text and
graphics printing. Unidirectional text or
graphics printing can be selected using
software commands.
Line spacing: 1/6-inch or programmable in 1/216-inch
increments
Printable columns: LX-300+: 80 columns (at 10 cpi)
LX-1170: 136 columns (at 10 cpi)
Resolution: 240 × 144 dpi maximum
Paper feed methods: Friction (top paper entry)
Push tractor (rear paper entry)
Pull tractor (bottom or rear paper entry)
Push and pull tractor (optional)
Cut-sheet feeder (optional)
Roll paper holder (optional)

Epson LX-1170 Specifications

Print Speed

high speed draft 15 CPI	337 cps
high speed draft 12 CPI	337 cps
high speed draft 10 CPI	300 cps
high speed draft 20 CPI condensed	300 cps
high speed draft 17 CPI condensed	321 cps

Power

rated voltage	AC 120V or AC 220~240V
rated frequency	50~60Hz
power consumption	23W

Environmental Conditions

temperature	5~35˚C
humidity	10~80% RH
acoustic noise	49dB (A)

Reliability

MVBF (Mean Print Volume Between Failure)	12 million lines
MTBF (Mean Time Between Failure)	6000 POH
print head life	400 million strokes/ wire

Weight and Dimensions

width	546 mm
depth	275 mm
height	163 mm
weight	6.3 kg