Epson LX-1170 User Manual

1-22
Setting Up the Printer
3. Choose Run from the File menu. The Run dialog box appears.
In the Command Line box, type D:SETUP. (If your CD-ROM
drive has a drive letter other than “D,” or if you are using a
floppy disk, substitute “D” with the appropriate drive letter.)
Then click OK.
If you wish to make a floppy disk version of the printer
software on your CD-ROM, type EPSETUP instead of SETUP.
In the dialog box that appears, click the Driver disk creation
utility button and follow the on-screen instructions.
4. The installation program begins copying the printer software
files onto your computer.
5. When the installation is complete, click OK to exit the
installation program.
The installation program automatically selects the LX-300+ as the
default printer for Windows applications.
For information on launching and using the software, see Chapter
3, “Using the Printer Software.”

Epson LX-1170 Specifications

Print Speed

high speed draft 15 CPI	337 cps
high speed draft 12 CPI	337 cps
high speed draft 10 CPI	300 cps
high speed draft 20 CPI condensed	300 cps
high speed draft 17 CPI condensed	321 cps

Power

rated voltage	AC 120V or AC 220~240V
rated frequency	50~60Hz
power consumption	23W

Environmental Conditions

temperature	5~35˚C
humidity	10~80% RH
acoustic noise	49dB (A)

Reliability

MVBF (Mean Print Volume Between Failure)	12 million lines
MTBF (Mean Time Between Failure)	6000 POH
print head life	400 million strokes/ wire

Weight and Dimensions

width	546 mm
depth	275 mm
height	163 mm
weight	6.3 kg