Epson LX-1170 User Manual

Troubleshooting
4-3
4
n = on, f = flashing
••• = short series of beeps (three beeps)
• • • • • = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the corresponding
function is not available.
f Paper Out
n Pause
••• Continuous paper is not fed back to the
standby position.
Tear off the printed document at the
perforation; then press the Load/Eject button.
The printer feeds the paper to the standby
position. Press the Pause button to turn off the
Pause light, if necessary.
••• A single sheet of paper is not fully ejected.
Press the Load/Eject button to eject the sheet.
Then press the Pause button to turn off the
Pause light, if necessary.
••• Paper is jammed in the printer.
Clear the paper jam as described in the
previous page.
f Pause – The print head is overheated.
Wait a few minutes; the printer resumes printing
automatically once the print head has cooled.
f All the lights
on the control
panel
• • • • • An unknown printer error has occurred.
Turn off the printer and leave it off for several
minutes; then turn on the printer again. If the
error recurs, contact your dealer.
Panel light
state
Beep
pattern
Problem
Solution

Epson LX-1170 Specifications

Print Speed

high speed draft 15 CPI	337 cps
high speed draft 12 CPI	337 cps
high speed draft 10 CPI	300 cps
high speed draft 20 CPI condensed	300 cps
high speed draft 17 CPI condensed	321 cps

Power

rated voltage	AC 120V or AC 220~240V
rated frequency	50~60Hz
power consumption	23W

Environmental Conditions

temperature	5~35˚C
humidity	10~80% RH
acoustic noise	49dB (A)

Reliability

MVBF (Mean Print Volume Between Failure)	12 million lines
MTBF (Mean Time Between Failure)	6000 POH
print head life	400 million strokes/ wire

Weight and Dimensions

width	546 mm
depth	275 mm
height	163 mm
weight	6.3 kg