Epson LX-1170

Using the Printer
2-13
2
4. Make sure your paper has a clean, straight leading edge. Open
the sprocket covers. Fit the first holes of the paper over the
sprocket pins and then close the sprocket covers. Slide the
right sprocket unit to remove any slack in the paper and lock
it in place. Now the paper is in the paper-park position.
c
Caution:
Use the paper-feed knob on the right side of the printer only
to clear paper jams and only when the printer is turned off.
Otherwise, you may damage the printer or cause it to lose
the top-of-form position.