Paper Handling 21
11. To separate the incoming paper from the printed paper,
attach the paper guide. Hold it horizontally and fit its
notches over the printer’s mounting posts. Then slide the
paper guide toward the back of the printer until you feel it
click.
12. Turn the paper feed knob to adjust the paper position. The
perforation between pages should be just above the print
head.
13. Replace the printer cover but leave it open.
14. Turn on the printer.
15. Set the Auto tear off feature in the Default Setting mode to
Off; otherwise, the paper may jam. (See page 67 for more
information.)
When the printer receives data, it begins printing automatically.
If you want to change the position where printing begins on the
page, press the LF/FF button to advance the page to the next top-
of-form position, and then see the next section to adjust the
loading position.
To eject the paper, tear off the paper entering the printer; then
press the LF/FF button to feed the paper forward.
To Next Page
Loading...
Need help?
General
